How to hang a banner:

Pic - Pole Diagram - 2

 

Step 1. Attach a “banner post” “to the outside “canopy post” with the Velco straps.

** “banner post” should be approx. 1 inch higher than “canopy post”.

 

Step 2. Attach ropes to the two top corner grommets.

 

Step 3. Slide the rope through the top slot, wrap around the post 2 times then

back through the top slot. (this will secure the banner with no knots)

 

Step 4. Repeat step 3 on the other side.

 

Step 5. Attach ropes to the two bottom corner grommets.

 

Step 6. Slide the rope through the slot below the Velco strap.

Wrap around “canopy post” several times and tie.